Package | General package or according to customer's requirement |
Sample time | 3 days for stock sample ; 10 days for OEM sample |
delivery time | about 25 days after the order, according to the time agreed in the contract |
expiration of pay | 30%TT before producing 70%before by B/L |
Logo | silk screen / customer logo acceptable |
About the vent hole at the bottom of the glass
The bottom of the double wall insulated glass coffee cup is flat and smooth, and there must be a vent hole, which is the vent hole that must be reserved in the process of making the double-layer cup. We will block this air outlet with colloid to reduce the circulation of air in the cup and the outside air, and also prevent water vapor from entering the cup and affect the appearance. However, after years of production experience, we can know that there will be more or less water vapor in the interlayer of double-layer cups that have been used for many years or have experienced improper use. This may be caused by the loose glue at the bottom of the cup due to high temperature or soaking. It is an unavoidable situation in the process, but it will not affect normal use.
Details about the glass
The mouth of the double wall insulated glass is composed of inner and outer cup interfaces, but it is still smooth and round without burrs and other problems. The handle of the glass cup and the outer layer of the glass cup are fused together by high temperature firing. Different from the bonding process, the high temperature can ensure that the two are completely fused together and will not fall off easily.
There is about 1-2mm difference according to manual measurement.(1 inch = 2.54 cm)
The height of the 350ml glass is about 10.7cm, the bottom diameter is about 6cm, and the mouth width is about 9.5cm.
The height of the 450ml glass is about 11.7cm, the bottom diameter is about 10cm, and the mouth width is about 10cm.
Variety of coloured inner glasses to choose from
The yellow inner glass, the green inner glass, the blue inner glass, and the light gray inner glass are all high borosilicate colored glass materials, which are not made by later spraying or electroplating. For more inner cup colors, you can contact us for communication and understanding. We are a factory-type supplier to provide small batch customization services, and can also support your different customization needs.
Glass capacity of different capacities
The capacity of this double wall insulated glass is 350ml and 450ml, and the size ratio is suitable for users with smaller and larger hands. The ergonomically designed handle can help you hold it more easily, and the handle can be customized according to your needs if you need a more comfortable grip.
About the material use of the glass
Manufacturers who make glass water cups pay attention to the quality of their products, and they are most concerned about the environmental protection and health of their products. The high temperature resistant borosilicate glass material is not easy to break, which can ensure the safety of users, and the healthy and non-polluting food grade material makes users feel at ease.
Our products can meet your every need for quality testing, and safe and environmentally friendly materials can easily pass food-grade testing requirements. If you need products for testing, please contact us in advance, and we will arrange samples for you to test in advance. Or we directly hand it over to a third-party testing agency you trust for testing.
Notice:
We are a factory that focuses on quality and a supplier who cares about service. Every product is handmade and there are subtle differences.Please note that slight color difference should be acceptable due to the light and screen.
If you have fancy products, you can also send pictures to us, we will provide the best price according to your needs. If you are satisfied with the price, we will make samples for you with the most attentive attitude. And send the samples to your hands for you to check the details to know the quality of the product. If you have any dissatisfaction, we will adjust it in time, and require every product with the same quality in mass production.
FAQ:
Q1. Can I order samples of your products?
A. If it is an item in stock, we do not need you to order it, we can provide it for free. Please contact us for details.
Q2. What's the delivery time like?
A. It takes about 3-8 working days for samples, and about 3-5 weeks for mass production.
Q3. What is your payment term?
A. Our normal payment term is T/T, 30% deposit and 70% balance and copy of bill of lading.
Q4. Can any logo be printed on the product?
A: Of course you can. We are very willing to make samples of products according to your drawing requirements or manuscript design. Every time the customer's needs are fulfilled is our joy.
Q5. Can the color and size of the product be customized?
A. Of course, please give us the look you want. We will try our best to meet your needs. The price of specific colors will fluctuate according to changes in market materials.
