The spraying production line of glass bottle generally consists of spraying room, hanging chain and oven. Glass bottles and the former water treatment, glass bottles special need to pay attention to the problem of sewage discharge. As for the quality of the glass bottle spraying, it is related to the water treatment, the surface cleaning of the workpiece, the conductive property of the hook, the size of the gas volume, the amount of the powder spraying, and the level of the operator. The following methods are recommended for trial:
The first processing
The pretreatment section of glass bottle spraying includes pre-stripping, main stripping, table adjustment, etc. If it is in the north, the temperature of the main stripping part can not be too low, and it needs to be kept warm. Otherwise, the processing effect is not ideal;
Preheating section
After pretreatment, it will enter the preheating section, which generally takes 8 ~ 10 minutes. It is best for the glass bottle to make the sprayed workpiece have a certain amount of waste heat when it reaches the powder chamber, so as to increase the adhesion of powder.
